We are Manufacturer, Supplier, Exporter of FRP Cooling Towers, FRP Cooling Tower Systems and our setup is situated in Pune, Maharashtra, India. We also provide Installation, Annual Maintenance Contract (AMC) Services, Operation And Maintenance Contract Services, Chemicals, Equipments, Spares (Spare Parts) for our whole product range.


A cooling tower is a heat rejection device that rejects waste heat to the atmosphere through the cooling of a water stream to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of closed circuit dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature.

Common applications include cooling the circulating water used in oil refineries, petrochemical and other chemical plants, thermal power stations, nuclear power stations and HVAC systems for cooling buildings. The classification is based on the type of air induction into the tower: the main types of cooling towers are natural draft and induced draft cooling towers.

Cooling towers vary in size from small roof-top units to very large hyperboloid structures (as in the adjacent image) that can be up to 200 metres (660 ft) tall and 100 metres (330 ft) in diameter, or rectangular structures that can be over 40 metres (130 ft) tall and 80 metres (260 ft) long. The hyperboloid cooling towers are often associated with nuclear power plants, although they are also used in some coal-fired plants and to some extent in some large chemical and other industrial plants. Although these large towers are very prominent, the vast majority of cooling towers are much smaller, including many units installed on or near buildings to discharge heat from air conditioning.

What are the benefits of FRP Cooling Towers?

Easy repairs : the most frustrating part about repairs is not finding the part you are looking for. We at Sara Cooling Tower have heard you and we have whatever part you might be looking for.

Low maintenance: the FRP type of cooling towers demands less work. Frequent inspection is key but if the installation was good and parts used were of good quality then maintenance if low.

Strong cooling towers: the fiberglass reinforced plastic is some strong material forged to make a strong cooling tower.

FRP cooling towers are flexible: the parts in the FRP cooling tower system can be easily removed, fixed and returned effortlessly without interfering with the operation of the cooling tower.

High Durability: cooling towers can last to 30 or more years and the FRP cooling tower is no different. Getting one installed will be cash well spent.

Great Quality : this type of cooling tower is of good quality compared to those made of wood or PVC. The good quality plays a part in its durability.

Portable: if the industrial site relocates that doesn’t mean money was wasted on the cooling tower, No. The FRP cooling tower is so cool as it can be transported to the new site and still maintain its performance.

Easy to clean: due to its design, the FRP cooling tower is easy to clean and drain off the accumulated sediments.